Magnetic Switch; Rear Bracket And Brush Holder; Overrunning Clutch, Planetary Gears, And Internal Gear; Yoke And Armature - Mazda 626 MX-6 Workshop Manual

Magnetic Switch

Remove the following parts:
(1) M terminal nut
(2) Wire
(3) Switch installation screws
(4) Magnetic switch
(5) Plunger and plunger spring
86U05X-33

Rear Bracket and Brush Holder

Remove the following parts:
(1) Brush holder installation screws
(2) Through bolts
(3) Rear cover
(4) Wave washer
(5) Brush holder assembly
Note
Put an aligning mark on the yoke and rear
bracket for reassembly before removing the
rear bracket.
7BU05X-034

Yoke and Armature

Remove the armature and yoke.
Note
Put an aligning mark on the yoke and front
bracket for reassembly before removing the
front bracket.
7BU05X-035
Overrunning Clutch, Planetary Gears, and Inter­
nal Gear.
Remove the following parts:
(1) Gasket
(2) Plate
(3) Planetary gears
(4) Internal gear
(5) Drive pinion
Note
Do not lose the ball.
7BU05X-110
STARTER 5
5 -2 3