Table of Contents
Advertisement
ASSEMBLY (AUXILIARY PARTS)
Alternator
1. Install the alternator strap and bracket.
Tightening torque:
37—63 N m (3.8—6.4 m-kg, 27—46 ft-lb)
86U01X-171
2. Install the alternator.
Tightening torque
(§): 31—46 N m
(3.2—4.7 m-kg, 23—34 ft-lb)
(§): 37—52 N m
(3.8—5.3 m-kg, 27—38 ft-lb)
3. Install the alternator drive belt, and adjust the belt
deflection. (Refer to page 1—6.)
86U01X-172
Coolant Inlet Pipe and Bypass Pipe
1. Install the coolant inlet pipe.
Tightening torque:
19—25 Nm (1.9—2.6 m-kg, 14—19 ft-lb)
2. Apply vegetable oil to the O-ring.
3. Install the coolant bypass pipe.
Tightening torque: 37—63 N m
(3.8—6.4 m-kg, 27—46 ft-lb)...Non-Turbo
86U01X-173
Engine Hanger
Install the front and rear engine hangers.
Tightening torque:
19—30 Nm (1.9—3.1 m-kg, 14—22 ft-lb)
Turbocharger Bracket (Turbo)
1. Remove the engine from the engine stand.
2. Install the turbocharger bracket.
Tightening torque:
37—52 Nm (3.8—5.3 m-kg, 27—38 ft-lb)
1
1 -79
Advertisement
Table of Contents
Troubleshooting
