Summit X460 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X460 Series Switches

The Summit X460 series switches are 24-port or 48-port switches that provide Ethernet connectivity
using fixed 10/100/1000BASE-T RJ-45 ports or installable SFP or SFP+ optical modules. Two
Summit X460 models support the PoE+ IEEE 802.3at standard and provide up to 30 Watts of power per
port. These models provide a total switch PoE power budget of 380 Watts with a single installed power
supply and 760 Watts with two installed power supplies.
Four of the Summit X460 models include ports that support Synchronous Ethernet. Five models have
four combination ports that provide 10/100/1000 BASE-T or SFP connectivity for 4 Gbps of copper or
fiber connectivity.
A serial console port on the front panel allows you to connect a terminal and perform local
management. An Ethernet management port can be used to connect the system to a parallel
management network for administration. Alternatively, you can use an Ethernet cable to connect this
port directly to a laptop to view and locally manage the switch configurations. The Ethernet
management port supports 10/100/1000 Mbps speeds.
The rear panel of the switch provides slots for installing the Summit option cards listed in
These port option cards allow you to add high-speed data ports or stacking ports to the switch.
Table 28: Port Option Cards for Summit X460 Series Switches
Option Card Model
Slot A
XGM3-2sf
XGM3S-2sf
XGM3S-2xf
Slot B
SummitStack
stacking module
SummitStack-V80
stacking module
XGM3SB-4sf
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either an AC
or DC power supply; the PoE-capable models require a specific AC power supply. For more information
about the power supplies used in the Summit X460 switches, see
Supplies" on page 133.
The Summit X460 series switches include the following base models:
Summit X460-24t switch
●
Summit X460-48t switch
●
Summit X460-24x switch
●
Summit X460-48x switch
●
Summit X460-24p switch
●
Summit X460-48p switch
●
Summit Family Switches Hardware Installation Guide
Connector Type
10-gigabit XENPAK modules
10-gigabit SFP+ modules
10-gigabit XFP modules
Integrated stacking ports
QSFP+ optical modules or
QSFP+ compatible active or
passive cables
10-gigabit SFP+ modules
(page 96)
(page 97)
(page 98)
(page 99)
(page 100)
(page 102)
Summit X460 Series Switches
Port Type
Data
Data with Sync-E support
Data with Sync-E support
20-Gbps bidirectional stacking
20-Gbps bidirectional stacking
Data with Sync-E support
"Summit Replaceable Internal Power
Table 28.
More Information,
Is on . . .
page 151
page 151
page 152
page 152
page 152
page 153
95