Removing A Summit Family Switch (Models Other Than Summit X460, X480, X650, And X670 Series); Removing A Summit X460 Series Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Table 88: Summit Switch Removal Instructions (continued)
Switch Series
Summit X460 series
Summit X480 series
Summit X650 series
Summit X670 series
Removing a Summit Family Switch (Models Other than Summit
X460, X480, X650, and X670 Series)
To remove a Summit switch from a rack:
1 Remove power from the switch in one of the following ways:
AC-powered switch: Unplug the power cables from the from the wall outlets first and then from the
switch.
DC-powered switch: De-energize the DC circuit for all power connections. Loosen the retainer nut
and unplug the DC power connector from the DC power socket on the rear of the switch.
2 Disconnect the Summit switch from the redundant power supply (if applicable).
3 For a DC-powered switch, disconnect the ground:
a At the back of the switch, loosen the retaining screw on the ground lug.
a Pull the ground wire out of the lug and move the ground wire out of the way.
4 Loosen and remove the four screws holding the switch in place in the equipment rack.
5 Carefully remove the switch from the rack and place it on a secure, flat surface.
Warning
Removing the DC wiring harness from your facilities DC source voltage must be
performed by a qualified, licensed electrician.

Removing a Summit X460 Series Switch

Before you remove a Summit X460 series switch from an equipment rack, remove all installed power
supplies as described in one of the following sections:
•
Removing a Summit X460 AC Power Supply
•
Removing a Summit X460 DC Power Supply
Summit Family Hardware Installation Guide
Rack Type, Position
Two-post, front-mount or
mid-mount
Two-post, mid-mount
Two-post, front-mount,
Four-post rack
Two-post rack, mid-mount
Four-post rack
Two-post rack, front-mount
or mid-mount
Removing a Summit Family Switch from a Rack
Section
Removing a Summit X460 Series Switch
Removing a Mid-Mounted Switch from a Two-Post Rack
Removing a Front-Mounted Switch from a Two-Post
Rack
Removing a Switch from a Four-Post Rack
Removing a Summit X650 Series Switch from a Two-
Post Rack
Removing a Summit X650 Series Switch from a Cabinet
or Four-Post Rack
Removing the Switch from the Rack
361