Summit X250E Series Switch Leds - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Summit Family of Switches
Table 28: Number of external power modules and corresponding PoE behavior
Internal Power
Supply Status
Internal power
supply:
Power on
Internal power
supply:
Power Failure
For specifications and installation instructions for the external power module, see
Power Module" on page

Summit X250e Series Switch LEDs

Table 29 lists the specific types of LEDs on the Summit X250e switches, along with their associated
colors and meanings.
Table 29: LEDs on the Summit X250e series switches
Label or Type
Chassis LEDs
MGMT
Fan
Power LEDs
PSU-I
(Internal power supply)
PSU-E
(External power supply)
250
EPS-600LS (1x) EPS-600LS (2x)
370 W of 740 W of
redundant power external power only
Internal power supply
disabled
370 W of 740 W of
external power only external power only
328.
Color/State
Blinking green
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
EPS-600LS (3x)
740 W of
external power only
with 2:1 redundancy
Internal power supply
disabled
740 W of
external power only
with 2:1 redundancy
Meaning
Power-on self-test (POST) in progress
POST passed. normal operation
System is disabled. POST failed or system overheated
No external power attached
Normal operation
Fan failure. Switch will continue to operate unless it
overheats.
No power
Normal operation
Failure
No power
Normal operation
Failure
No external power attached
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
External PSU/Chassis
Failed/Disconnected
370 W of
internal power only
No PoE power
"EPS-600LS External