Chapter 10: Replacing Dc Power Supplies In Summit Family Switches - Extreme Networks Summit X150-24t Hardware Installation Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
10
C H A P T E R
This chapter describes how to replace DC power supplies in a Summit X460, X480, X650, or X670 series
switch. These switches have two bays for hot-swappable power supplies. In a switch with a redundant
power configuration, you can replace one Summit DC power supply without powering down
the switch.
This chapter includes the following sections:
Replacing a Summit 300 W DC Power Supply on page 294
G
Replacing a Summit 450 W or 550 W DC Power Supply on page 298
G
Replacing a Summit 850 W DC Power Supply on page 304
G
Removing an EPS-150DC Power Module from an EPS-T2 Tray on page 308
G
NOTE
Read the information in this chapter thoroughly before attempting to replace one of the listed
Summit X650 components.
Summit Family Switches Hardware Installation Guide
All rights reserved. DRAFT. October 20, 2011
Replacing DC Power Supplies
in Summit Family Switches
293