Connecting The Ground Wire - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 320: Installing a Summit 300 W
DC Power Supply (Model 10934A)

Connecting the Ground Wire

To connect the ground wire to the Summit 300 W DC power supply:
1 Verify that the DC circuit is de-energized.
2 Identify the grounding point on the front panel of the power supply (see
Ground Wire (Model 10934A)
3 Insert an M3.5 screw (provided) through the ring terminal on the ground wire and into the
grounding point on the power supply.
4 Tighten the screw to 12.6 inch-pounds.
5 Connect the other end of the wire to a known reliable earth ground point at your site.
Figure 322: Connecting the Ground Wire (Model 10934A)
1 = Grounding point
Summit Family Hardware Installation Guide
Replacing DC Power Supplies in Summit Family Switches
Figure 321: Installing a Summit 300 W
DC Power Supply (Model 10933)
on page 336).
2 = Ground wire
Figure 322: Connecting the
336