Yamaha TZ250M1 Owner's Service Manual page 98

RECHARGING BATTERY
[Using the automobile battery]
1. Remove:
• Seat
• Battery
2. Connect an automobile battery 1 to the
battery 2 using the checking lead (supply-
ing parts) 3, and recharge the battery.
&
Automobile battery (+) lead ≥
Automobile battery (-) lead ≥
Charge time:
3 hours
Voltage when charged:
o
12.8V or more
(or 12.5V or more)
Voltage of the automobile battery
for power supply:
12.8~13.8V (maximum 14.9V)
NOTE:
If the battery is recharging using an automobile
battery, the charge may not exceed 12.8V.
Then, 12.5V or more will be OK.
C C CAUTION:
• For an automobile battery for supply, use
a battery with a capacity of 12V20Ah or
more with a voltage 12.8 to 13.2.
• During the battery recharge, do not
recharge the power supply battery by
starting or running the engine.
• Connect only one battery for recharge.
3-45
INSP
ADJ
≥
Red lead 4 4
≥
Black lead 5 5