Yamaha TZ250M1 Owner's Service Manual page 104

RADIATOR
2. Install:
• Radiator breather hose 1
• Radiator hose 3 2
T
• Radiator hose 4 3
T
• Radiator hose 2 4
T
• Thermo unit 5
GT
• Water temperature gauge lead 6
NOTE:
• Insert the end of the radiator breather hose
into the frame. Refer to "CONTROL FUNC-
TION" section in the CHAPTER 1.
• Before applying LOCTITE
the thread of the thermo unit and its recepta-
cle on the radiator.
• Apply LOCTITE ®
thread portion on the coupler side so as to
prevent LOCTITE
radiator.
4-6
ENG
2 Nm (0.2 mdkg, 1.4 ftdlb)
2 Nm (0.2 mdkg, 1.4 ftdlb)
2 Nm (0.2 mdkg, 1.4 ftdlb)
11 Nm (1.1 mdkg, 8.0 ftdlb)
® , wipe off dirt on
to half of the thermo unit
® from protruding into the