Yamaha TZ250M1 Owner's Service Manual page 52

1 Clamp
2 Throttle cable
3 Fuel tank breather hose
4 Fuel pump stop switch lead
5 Battery lead
6 Fuel pump relay lead
7 Power supply coupler
8 CDI magneto lead
9 Front brake hose (left)
CABLE ROUTING DIAGRAM
A Clamp the wireharness together with couplers of the fuse lead under the
cowling stay mounting bolt so that the tape on the wireharness aligns
with the bolt.
B Fasten the primary ground lead together with the cowling stay bracket
mounting bolt.
C Do not cut the end of the clamp.
D Clamp the couplers of the main switch lead together with the wirehar-
ness.
E Disconnect the power supply coupler except when the engine is started
or when electric parts are checked.
F Be sure the brake hose is not twisted.
2-15
SPEC