Rear Shock Absorber - Yamaha TZ250M1 Owner's Service Manual

EC580000

REAR SHOCK ABSORBER

34 Nm (3.4 mdkg, 24 ftdlb)
T
34 Nm (3.4 mdkg, 24 ftdlb)
T
1 Rear shock absorber removal
Extend of removal:
Extend of removal Order
Preparation for
removal
1
2
REAR SHOCK ABSORBER
Part name
REAR SHOCK ABSORBER
REMOVAL
Hold the machine by placing
the suitable stand.
Lower cowl, seat and fuel tank
Exhaust pipe
1 Bolt (rear shock absober
– relay arm)
2 Cap
3 Bolt (Upper bracket)
4 Rear shock absober
5 Bolt (rea shock absober
– upper bracket)
6 Upper bracket
7 Locknut
8 Adjuster
9 Spring guide
10 Spring (rear shock absober)
38 Nm (3.8 mdkg, 27 ftdlb)
T
40 Nm (4.0 mdkg, 29 ftdlb)
T
20 Nm (2.0 mdkg, 14 ftdlb)
T
2 Rear shock absorber disassembly
Q'ty
W
Support the machine securely so there
is no danger of it falling over.
Refer to "COWLING, INDUCTION
GUIDE SEAT AND FUEL TANK"
section in the CHAPTER 4.
Refer to "EXHAUST PIPE AND
SILENCER" section in the
CHAPTER 4.
1 Hold the swingarm.
1
1
1 Refer to "REMOVAL POINTS".
1
1
1 Loosen.
1 Loosen.
1
1
5-60
CHAS
Remarks