Yamaha TZ250M1 Owner's Service Manual page 146

SHIFT SHAFT
EC4F5302
Shift shaft
1. Install:
• Roller 1
• Torsion spring 2
• Shift shaft 3
NOTE:
Apply the transmission oil on the roller and shift
shaft.
2. Install:
• Plain washer 1
• Circlip 2N
To shift shaft 3.
NOTE:
Be sure the circlip sharp-edged corner a is
positioned opposite side to the plain washer.
3. Check:
• Shift lever position
Checking steps:
• Attach the collar (with supplying parts) 2
onto the roller 1.
• Check the shift lever position.
Gaps a and b are not equal ≥ Adjust.
4. Adjust:
• Shift lever position
Adjusting steps:
• Loosen the locknut 3.
U
• Turn the adjuster 4 in or out.
• Tighten the locknut.
Locknut:
9 Nm (0.9 m•kg, 6.5 ft•lb)
• Remove the collar.
4-48
ENG