Steering - Yamaha TZ250M1 Owner's Service Manual

EC560000

STEERING

EC568000
HANDLE CROWN AND STEERING DAMPER
5 Nm (0.5 mdkg, 3.6 ftdlb)
T
1 Handle crown removal
Extend of removal:
Extend of removal Order
Preparation for
removal
1
2
80 Nm (8.0 mdkg, 58 ftdlb)
T
Part name
HANDLE CROWN AND
STEERING DAMPER REMOVAL
Hold the machine by placing
the suitable stand.
Cowling
Induction guide (left cylinder)
Bolt (Front brake reservoir tank)
Front brake caliper
Front wheel
Front fender
1 Steering shaft nut
2 Pinch bolt (handle crown)
3 Handle crown
4 Clip
5 Bolt (steering damper)
6 Steering damper
7 Steering damper bracket
STEERING
T
18 Nm (1.8 mdkg, 13 ftdlb)
T
2 Steering damper removal
Q'ty
W
Support the machine securely so there
is no danger of it falling over.
Refer to "COWLING, INDUCTION
GUIDE, SEAT AND FUEL TANK"
section in the CHAPTER 4.
Refer to "FRONT BRAKE AND
REAR BRAKE" section.
Refer to "FRONT WHEEL AND
REAR WHEEL" section.
1
2 Only loosening.
1
1
1
1
1
5-46
CHAS
20 Nm (2.0 mdkg, 14 ftdlb)
Remarks