Yamaha TZ250M1 Owner's Service Manual page 63

CLUTCH ADJUSTMENT/
THROTTLE CABLE ADJUSTMENT
EC359001
CLUTCH ADJUSTMENT
a 1. Check:
2. Adjust:
NOTE:
After adjustment, check proper operation of
clutch lever.
EC35A040
THROTTLE CABLE ADJUSTMENT
a 1. Check:
2. Remove:
3. Loosen the screw (right carburetor joint
3-10
• Clutch lever free play a
Out of specification ≥ Adjust.
Clutch lever free play a a :
2~3 mm (0.08~0.12 in)
• Clutch lever free play
Clutch lever free play adjustment steps:
• Loosen the locknut 1.
• Turn the adjuster 2 until free play a is
within the specified limits.
• Tighten the locknut.
• Throttle grip free play a
Out of specification ≥ Adjust.
Throttle grip free play a a :
2~4 mm (0.08~0.16 in)
• Lower cowl
• Fuel tank
• Induction guide (right cylinder)
clamp), then take out the carburetor 1.
INSP
ADJ