Yamaha TZ250M1 Owner's Service Manual page 202

FRONT BRAKE AND REAR BRAKE
5-22
3. Install:
• Brake pedal 1
• Brake pedal connecting bolt 2
• Nut (brake pedal connecting bolt) 3
12 Nm (1.2 mdkg, 8.7 ftdlb)
T
NOTE:
After installing, check the brake pedal height.
Refer to "REAR BRAKE ADJUSTMENT" sec-
tion in the CHAPTER 3.
EC535541
Front brake hose
1. Install:
• Copper washer 1N
• Brake hose 2
• Union bolt 3 T
30 Nm (3.0 mdkg, 22 ftdlb)
W
Always use new copper washers.
C C CAUTION:
Install both brake hoses so that they form
an angle a a of 60˚ to the brake lever 4 4 .
2. Install:
• Copper washer 1N
• Adapter 2
26 Nm (2.6 mdkg, 19 ftdlb)
T
• Brake hose 3 T
14 Nm (1.4 mdkg, 10 ftdlb)
W
Always use a new copper washer.
NOTE:
When turning the adapter over the brake hose,
hold the brake hose so that it may not be twist-
ed.
3. Install:
• Clamp 1
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
CHAS