Yamaha TZ250M1 Owner's Service Manual page 189

FRONT WHEEL AND REAR WHEEL
5-9
a
10.Adjust:
• Drive chain slack a
Drive chain slack:
40~50 mm (1.6~2.0 in)
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" section in the CHAPTER 3.
11. Tighten:
• Nut (wheel axle) 1
80 Nm (8.0 mdkg, 58 ftdlb)
T
• Adjuster 2
2 Nm (0.2 mdkg, 1.4 ftdlb)
T
• Locknut 3
16 Nm (1.6 mdkg, 11 ftdlb)
T
NOTE:
• Tighten the axle nut while pushing down the
drive chain.
• After tightening the axle nut, tighten the lock-
nut with the turned out the adjuster.
12.Adjust:
• Wheel alignment
Refer to "WHEEL ALIGNMENT ADJUST-
MENT" section in the CHAPTER 3.
CHAS