Yamaha TZ250M1 Owner's Service Manual page 221

HANDLEBAR
EC5B3000
REMOVAL POINTS
EC5B3200
Grip
1. Remove:
• Grip 1
NOTE:
Blow in air between the handlebar or tube
guide and the grip. Then remove the grip which
has become loose.
EC5B4000
INSPECTION
EC5B4100
Handlebar
1. Inspect:
• Handlebar 1
Bends/Cracks /Damage ≥ Replace.
W
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
EC5B5000
ASSEMBLY AND INSTALLATION
EC5B5110
Throttle assembly
1. Install:
• Ring plate 1
• Grip (right) 2
Apply the adhesive on the tube guide 3.
NOTE:
Before applying the adhesive, wipe off grease
or oil on the tube guide surface a with a lac-
quer thinner.
EC5B5230
Handlebar
1. Install:
• Handlebar 1
• Grip end 2
NOTE:
Temporarily tighten the bolts (handlebar).
5-41
CHAS