Yamaha TZ250M1 Owner's Service Manual page 144

SHIFT SHAFT
2. Remove:
• Circlip 1
• Plain washer 2
• Stopper lever 3
EC4F4000
INSPECTION
EC4B4400
Shift shaft
1. Inspect:
• Shift shaft 1
Bend/Damage ≥ Replace.
• Spring 2
Broken ≥ Replace.
EC4C4100
Shift guide and shift lever assembly
1. Inspect:
• Shift guide 1
• Shift lever 2
• Pawl 3
• Pawl pin 4
• Spring 5
Wear/Damage ≥ Replace.
EC4B4500
Stopper lever
1. Inspect:
• Stopper lever 1
Wear/Damage ≥ Replace.
• Torsion spring 2
Broken ≥ Replace.
EC4F5000
ASSEMBLY AND INSTALLATION
EC4F5100
Stopper lever
1. Install:
• Stopper lever 1
• Plain washer 2
• Circlip 3N
To collar 4.
NOTE:
Be sure the circlip sharp-edged corner a is
positioned opposite side to the plain washer.
4-46
ENG