Yamaha TZ250M1 Owner's Service Manual page 26

CONTROL FUNCTIONS
NOTE:
• If an out-of-step indication takes place, mov-
ing the main switch to "OFF" once and then to
"RUN", brings the tachometer back to a nor-
mal indication through its corrective action.
• There is no functional problem involved with
the out-of-step indication, which can be
brought back to a normal indication through
the corrective action of the tachometer.
EC15B010
WATER TEMPERATURE GAUGE
The water temperature gauge 1 displays dif-
ferent indications according to the change in
the water temperature.
NOTE:
Water temperature may be 70 ˚C (158 ˚F)
when engine is operated in good conditions.
Cooling water
temp.
~19 ˚C
(~66 ˚F)
20~119 ˚C
(68~247 ˚F)
120~140 ˚C
(248~284 ˚F)
141 ˚C~
(285 ˚F~)
EC15F000
VALVE JOINT
This valve joint 1 prevents fuel from flowing
out and is installed to the fuel tank breather
hose.
C C CAUTION:
In this installation, make sure the arrow
faces the fuel tank and also downward.
EC15X000
BATTERY
The battery 1 is provided as power supply for
the electric parts. Except when the machine is
run, disconnect the power supply coupler 2 of
the wireharness to prevent battery discharge.
1-11
GEN
INFO
Display Conditions
"LO" is display.
Temperature is
displayed.
Temperature
flash.
Message "HI"
flash.