Yamaha TZ250M1 Owner's Service Manual page 29

CONTROL FUNCTIONS
EC15Q001
DETACHABLE MAINSTAND
This mainstand 1 is used to support only the
machine when standing or transporting it.
NOTE:
The mainstand can be used to support the
machine two ways.
1. Hook the bracket of the mainstand onto the
swingarm hooks 2.
2. Stand shaft (with supplying parts):
Insert the stand shaft 3 through the hole of
the mainstand and rear wheel axle. Be sure
to install the clip 4 in the end of the stand
shaft.
W
• Never apply additional force to the main-
stand.
• Remove this mainstand before starting
out.
EC15R001
DETACHABLE SIDESTAND
This sidestand 1 is used to support only the
machine when standing or transporting it.
W
• Never apply additional force to the side-
stand.
• Remove this sidestand before starting out.
EC15T003
FIRE RETARDANT MATERIAL
For racing, be sure to fill the fuel tank 2 com-
pletely with fire retardant material (with supply-
ing parts) 1.
EC15b000
COUPLER FOR SPEED SHIFT
If an after-marked speed shift is installed, the
coupler 1 should be used.
NOTE:
If the speed shift is not installed, be sure to fix
the coupler to the wireharness using a vinyl
tape, for protection against water entry as well
because if the coupler contacts the frame,
sparks will be shut off, causing the engine to
stop.
1-14
GEN
INFO