Yamaha TZ250M1 Owner's Service Manual page 219

FRONT FORK
4. Tighten:
• Pinch bolt (handle crown) 1
• Pinch bolt (under bracket) 2
• Pinch bolt (handlebar) 3
• Pinch bolt (steering damper stay) 4 (right
side only)
Refer to "FRONT FORK TOP END
ADJUSTMENT" in the CHAPTER 3.
5. Check:
• Steering smooth action
Turn the handlebar to make sure no parts
are being contacted with others.
Contact ≥ Repair.
6. Adjust:
• Rebound damping force
• Spring preload
NOTE:
• Turn in the rebound damping adjuster 1 fully,
then turn out it to the originally set position.
• Turn in the spring preload adjuster 2 to the
originally set position.
7. Install:
• Front fender 1
• Bolt (front fender) 2
5-39
CHAS
20 Nm (2.0 mdkg, 14 ftdlb)
T
23 Nm (2.3 mdkg, 17 ftdlb)
T
7 Nm (0.7 mdkg, 5.1 ftdlb)
T
10 Nm (1.0 mdkg, 7.2 ftdlb)
T
8 Nm (0.8 mdkg, 5.8 ftdlb)
T