Yamaha TZ250M1 Owner's Service Manual page 187

FRONT WHEEL AND REAR WHEEL
5-7
EC5251B0
Rear wheel
1. Install:
• Fitting plate (right) 1
• Bearing (right) 2
• Spacer 3
• Fitting plate (left) 4
• Bearing (left) 5
NOTE:
• Apply the lithium soap base grease on the
bearing when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
C C CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake disc 1
• Bolt (brake disc) 2
23 Nm (2.3 mdkg, 17 ftdlb)
GT
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
• Collar 1
NOTE:
If the collar is hard to install, apply the lithium
soap base grease on the collar and press it in.
4. Install:
• Clutch hub 1
• Sprocket damper 2
• Nut (sprocket damper) 3
32 Nm (3.2 mdkg, 23 ftdlb)
T
To driven sprocket 4.
CHAS