Yamaha TZ250M1 Owner's Service Manual page 237

SWINGARM
2. Install:
• Bearing 1
To relay arm.
NOTE:
• Apply the lithium soap base grease on the
bearing when installing.
a
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a a :
Zero mm (Zero in)
EC575141
Swingarm
1. Install:
• Collar 1
To relay arm 2.
NOTE:
Apply the lithium soap base grease on the col-
lars and bearings.
2. Install:
• Relay arm 1
• Bolt (relay arm) 2
• Nut (relay arm) 3
NOTE:
Apply the lithium soap base grease on the bolt.
3. Install:
• Bush 1
• Thrust bearing 2
• Cover 3
To swingarm 4.
NOTE:
Apply the lithium soap base grease on the
bush, bearings and cover lips.
5-57
CHAS
34 Nm (3.4 mdkg, 24 ftdlb)
T