Yamaha TZ250M1 Owner's Service Manual page 232

STEERING
13.Adjust:
• Front fork top end a
• Handlebar position b
• Steering damper stay position c (right side
only)
Front fork top end:
e
13 mm (0.51 in)
Handlebar position:
9 mm (0.35 in)
Steering damper stay position:
73 mm (2.87 in)
Refer to "FRONT FORK TOP END
ADJUSTMENT" in the CHAPTER 3.
14.Tighten:
• Pinch bolt (handle crown) 1
• Pinch bolt (under bracket) 2
• Pinch bolt (handlebar) 3
• Pinch bolt (steering damper stay) 4 (right
side only)
Refer to "FRONT FORK TOP END
ADJUSTMENT" in the CHAPTER 3.
15.Check:
• Steering smooth action
Turn the handlebar to make sure no parts
are being contacted with others.
Contact ≥ Repair.
5-52
CHAS
20 Nm (2.0 mdkg, 14 ftdlb)
T
23 Nm (2.3 mdkg, 17 ftdlb)
T
7 Nm (0.7 mdkg, 5.1 ftdlb)
T
10 Nm (1.0 mdkg, 7.2 ftdlb)
T