Yamaha TZ250M1 Owner's Service Manual page 71

FRONT BRAKE ADJUSTMENT/
REAR BRAKE ADJUSTMENT
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
reservoir.
W
Check the operation of the brake after
bleeding the brake system.
3. Install:
• Diaphragm
• Reservoir tank cap
EC363010
FRONT BRAKE ADJUSTMENT
1. Adjust:
S
• Brake lever position a
Adjustment steps:
• Turn the adjuster 1 while pushing the
S
brake lever 2 forward until the desired
lever position is obtained.
Closer ≥
Farther ≥
NOTE:
Align the mating mark d on the adjuster
with the arrow mark e on the brake lever.
EC364011
REAR BRAKE ADJUSTMENT
a 1. Check:
• Brake pedal height a
Out of specification ≥ Adjust.
3-18
INSP
ADJ
≥ Turn the adjuster in b b .
≥ Turn the adjuster out c c .
Brake pedal height a a :
148~152 mm (5.8~6.0 in)