Yamaha TZ250M1 Owner's Service Manual page 210

FRONT FORK
EC553321
Damper rod
1. Remove:
• Locknut 1
2. Remove:
• Bolt (damper rod) 1
• Damper rod 2
NOTE:
A
Use a damper rod holder 3 to lock the damper
rod.
Damper rod holder:
YM-01425/90890-01425
EC554000
INSPECTION
EC554100
Damper rod
1. Inspect:
• Damper rod 1
Bend/Damage ≥ Replace damper rod.
C C CAUTION:
The front fork with a built-in piston rod has
a very sophisticated internal construction
and is particularly sensitive to foreign
material.
Use enough care not to allow any foreign
material to come in when the oil is replaced
or when the front fork is disassembled and
reassembled.
EC554400
Fork spring
1. Measure:
• Fork spring free length a
Out of specification ≥ Replace.
]
Fork spring free length:
Standard
212.5 mm
(8.37 in)
5-30
CHAS
Limit
210.5 mm
(8.29 in)