Yamaha TZ250M1 Owner's Service Manual page 227

EC568100
UNDER BRACKET
7 Nm (0.7 mdkg, 5.1 ftdlb)
T
10 Nm (1.0 mdkg, 7.2 ftdlb)
T
1 Under bracket removal
Extend of removal:
Extend of removal Order
1
2
Part name
UNDER BRACKET REMOVAL
1 Pinch bolt (steering damper stay)
2 Pin
3 Pinch bolt (handlebar)
4 Pinch bolt (under bracket)
5 Front fork
6 Ring nut
7 Under bracket
8 Inner fender
9 Ball race cover
10 Bearing (upper)
11 Bearing (lower)
12 Ball race
STEERING
TIGHTENING STEPS:
t
• Tighten ring nut.
46 Nm (4.6 mdkg, 33 ftdlb)
• Loosen it one turn.
• Retighten it.
1 Nm (0.1 mdkg, 0.7 ftdlb)
23 Nm (2.3 mdkg, 17 ftdlb)
T
2 Bearing removal
Q'ty
1 Only loosening.
1
4 Only loosening.
4 Only loosening.
2 Refer to "FRONT FORK" section.
1 Use special tool.
Refer to "REMOVAL POINTS".
1
1
1
1
1 Refer to "REMOVAL POINTS".
2 Refer to "REMOVAL POINTS".
5-47
CHAS
Remarks