Yamaha TZ250M1 Owner's Service Manual page 214

FRONT FORK
10.Install:
• Stopper ring 1
NOTE:
Fit the stopper ring correctly in the groove in
the outer tube.
11. Check:
• Inner tube smooth movement
Tightness/Binding/Rough spots ≥ Repeat
the steps 2 to 10.
12.Compress the front fork fully.
13.Fill:
0
• Front fork oil
Until outer tube top surface with recom-
mended fork oil 1.
Recommended oil:
Suspension oil "01"
C C CAUTION:
• Be sure to use recommended fork oil. If
other oils are used, they may have an
excessively adverse effect on the front
fork performance.
• Never allow foreign materials to enter the
front fork.
14.After filling, pump the damper rod 1 slowly
up and down more than 10 times to distrib-
ute the fork oil.
NOTE:
Use the rod puller 2 and rod puller attachment
3 to pull up and down the damper rod.
C
Rod puller 2 2 :
YM-01437/90890-01437
Rod puller attachment 3 3 :
90890-01435
5-34
CHAS