Yamaha TZ250M1 Owner's Service Manual page 185

FRONT WHEEL AND REAR WHEEL
5-5
EC524100
Clutch hub
1. Inspect:
• Bearing 1
Rotate inner race with a finger.
Rough spot/Seizure ≥ Replace.
EC595000
ASSEMBLY AND INSTALLATION
EC515172
Front wheel
1. Install:
• Bearing (right) 1
• Spacer 2
• Bearing (left) 3
NOTE:
• Apply the lithium soap base grease on the
bearing when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
C C CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake disc 1
• Bolt (brake disc) 2
20 Nm (2.0 mdkg, 14 ftdlb)
GT
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
• Collar 1
NOTE:
If the collar is hard to install, apply the lithium
soap base grease on the collar and press it in.
CHAS