Yamaha TZ250M1 Owner's Service Manual page 65

YPVS OPEN SIDE CABLE ADJUSTMENT
EC35D012
YPVS OPEN SIDE CABLE ADJUSTMENT
1. Disconnect the fuel pump coupler to pre-
vent the fuel pump operation.
2. Check:
• YPVS open side cable free play a
Checking steps:
• Move the main switch to "RUN".
• The servomotor will be fully opened.
NOTE:
After the main switch is moved to "RUN",
the servomotor will be operated as follows.
1. The servomotor will be fully closed about
1 second.
µ
2. And then, it will be kept fully opened.
• Check the free play a for the YPVS open
side cables 1.
Out of specification ≥ Adjust.
YPVS open side cable free
play a a :
2~3 mm (0.08~0.12 in)
3. Adjust:
• YPVS open side cable free play
Adjusting steps:
• Fully open the servomotor.
• Loosen the locknuts 1.
• Turn the adjusters 2 until the specified
free play is obtained.
• Tighten the locknuts.
3-12
INSP
ADJ