Yamaha TZ250M1 Owner's Service Manual page 244

REAR SHOCK ABSORBER
4. Tighten:
• Locknut 1
EC5852A0
Rear shock absorber
1. Install:
• Upper bracket 1
• Bolt (rear shock absorber – upper bracket) 2
• Plain washer (rear shock absorber – upper
bracket) 3
• Nut (rear shock absorber – upper bracket) 4
NOTE:
Apply the lithium soap base grease on the bolt.
2. Install:
• Rear shock absorber
3. Install:
• Bolt (upper bracket) 1
• Cap 2
4. Install:
• Bolt (rear shock absorber – relay arm) 1
• Nut (rear shock absorber – relay arm) 2
NOTE:
Apply the lithium soap base grease on the bolt.
5-64
CHAS
20 Nm (2.0 mdkg, 14 ftdlb)
T
34 Nm (3.4 mdkg, 24 ftdlb)
T
40 Nm (4.0 mdkg, 29 ftdlb)
T
34 Nm (3.4 mdkg, 24 ftdlb)
T