Yamaha TZ250M1 Owner's Service Manual page 145

SHIFT SHAFT
2. Install:
• Plain washer 1
• Torsion spring 2
• Stopper lever assembly 3
EC4F5202
Shift guide and shift lever assembly
1. Install:
• Spring 1
• Pawl pin 2
• Pawl 3
To shift lever 4.
NOTE:
• When installing the pawl into the shift lever,
make sure the chamfered side a face the
pawl pin side.
• Apply the transmission oil on the pawl pin.
2. Install:
• Shift lever assembly 1
To shift guide 2.
3. Install:
• Shift lever assembly 1
• Shift guide 2
NOTE:
• The shift lever assembly is installed at the
same time as the shift guide.
• Apply the transmission oil on the bolt (seg-
ment) shaft.
4. Install:
• Bolt (shift guide) 1
4-47
ENG
11 Nm (1.1 mdkg, 8.0 ftdlb)
T