Yamaha TZ250M1 Owner's Service Manual page 64

STARTER CABLE ADJUSTMENT
4. Adjust:
• Throttle grip free play
Throttle grip free play adjustment steps:
• Loosen the locknuts 1, 2, 3.
• Turn the adjusters 4, 5, 6 fully in.
• Turn out the right carburetor adjuster 5
• Tighten the right carburetor locknut 2.
• Turn out the left carburetor adjuster 6 until
NOTE:
• When adjusting left throttle cable, watch
• After adjusting the throttle cables, open the
• Tighten the left carburetor locknut 3.
• Tighten the locknuts 1.
W
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling dose not run faster.
EC35B002
STARTER CABLE ADJUSTMENT
a
1. Check:
• Starter lever free play a
2. Adjust:
• Starter lever free play
Starter lever free play adjustment steps:
• Loosen the locknuts 1.
• Turn the adjusters 2 until the specified
• Tighten the locknuts.
3-11
until the specified free play is obtained.
the left throttle valve moves together with
the right throttle valve.
the right throttle valve and touch the left
throttle valve.
throttle grip and check that both throttle
valves are completely open.
Out of specification ≥ Adjust.
Starter lever free play a a :
5~10 mm (0.20~0.39 in)
free play is obtained.
INSP
ADJ