Yamaha TZ250M1 Owner's Service Manual page 92

COWLING INSTALLATION INSPECTION
WIRES, CABLES/
]
Extent of adjustment:
Maximum
Fully turned-in
position
• STANDARD POSITION:
a This is the position which is back by the spe-
cific number of clicks from the fully turned-out
position.
Standard position:
0 click in
NOTE:
Fully turn out the adjuster and then turn it in.
Specify the position in which the first click is
heard as the zero position . If a click is heard
just when the adjuster is fully turned out, this
position is zero.
C C CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
EC36X001
WIRES, CABLES
1. Inspect:
• Smooth movement for steering handle
By turning the handlebar lock to lock.
If any caught/rubbed ≥ Repair/Replace.
EC36Z000
COWLING INSTALLATION INSPECTION
1. Inspect:
• Cowling
Loosen ≥ Tighten.
Stroke the front fork to make sure no parts
are being contacted with others.
Contact ≥ Repair or replace.
• Screen
Scratches/fogging ≥ Clean or replace.
3-39
INSP
ADJ
Minimum
Fully turned-out
position