Ricoh 920F Operating Instructions Manual page 70

3. While pinching the release levers, pull the end fence off from the tray.
4. While pressing down the release levers, slide the side fences until they are aligned with the
paper size you want to load.
Make sure there are no gaps between the paper and side fences.
5. While pinching the release levers, set the end fence to the paper size you want to load.
Make sure there are no gaps between the paper and end fence.
To load A4 size paper, place the end fence in the corner pocket on the left.
BRA022S
BRA024S
BRA025S
Changing the Paper Size
69
3