3. Adding Paper
1.
Carefully pull out the paper tray until it stops.
3
2.
Press the metal plate down until it clicks.
3.
Square the paper and load it print side up.
Do not stack paper over the limit mark.
4.
Carefully push the paper tray fully in.
• The illustrations above show Tray 1.
• When using the optional paper tray unit (Tray 2 and Tray 3), load paper flush against the right side
of the tray. Space between the paper and the tray's sides can cause misfeeds.
64
BRA017S
BRA018S
BRA019S