Aastra 9143i Series Administrator's Manual page 554

IP Phone Administrator Guide
Operational Features
The following table describes the key and Message Waiting Indicator (MWI)
LEDs when you enable CFWD on the IP Phone.
Key LED Behavior
for All Modes
CFWD key LED
Busy, or CFWD No Answer is enabled for
the account in focus.
CFWD key LED OFF if any CFWD mode
is disabled.
You can enable/disable CFWD and set a CFWD key using the configuration files
or the Aastra Web UI. You can set CFWD mode (Account, Phone, Custom)
using the configuration files, Aastra Web UI or IP Phone UI.
Important Notes
• In the configuration files, the "call forward key mode" parameter in the
section,
previous call forward parameter (call forward disabled). You can still use the
previous call forwarding parameter if desired in the configuration files.
• In the IP Phone UI, you can access the Call Forwarding features at the path
Options->Call Forward or by pressing a configured CFWD key.
• If you make changes to the configuration for CFWD via the IP Phone UI,
you must refresh the Aastra Web UI screen to see the changes.
5-250
RED if CFWD All, CFWD
"Configuring Call Forwarding"
MWI LED Behavior
for All Modes
MWI LED ON if current account in focus has
CFWD ALL enabled.
MWI LED OFF if CFWD All is disabled.
on page 5-251 is in addition to the
41-001160-03 Rev 00, Release 2.5