Aastra 9143i Series Administrator's Manual page 544

IP Phone Administrator Guide
Operational Features
Aastra Web UI
11 In the "Value" field, enter the appropriate value based on the server in your network.
Note: For values to enter in this field, see the table
on page 5-238.
12 In the "Line" field, select a line for which to apply the Pickup configuration.
13 The pickup softkey has a default state of "Idle" and "Outgoing".
Leave these states enabled or to disable, uncheck the check boxes.
14 Click
For CT Handset:s
1 Click on Operation->Handset Keys.
2 Pick a handset key to configure for parking a call.
3 In the "Key Function" field, select Park.
4 Pick another handset key to configure for picking up a call.
5 In the "Key Function" field, select Pickup.
6 Click
5-240
to save your changes.
to save your changes.
"Park/Pickup Call Server Configuration Values"
41-001160-03 Rev 00, Release 2.5