Advanced Operational Features; Description - Aastra 9143i Series Administrator's Manual

Advanced Operational Features

Description

This section provides the following information about advanced features of the IP
phones:
Feature
MAC Address/Line Number in REGISTER
Messages
SIP Message Sequence for Blind Transfer
Update Caller ID During a Call
Boot Sequence Recovery Mode
Auto-discovery Using mDNS
Single Call Restriction (6757i CT and 9480i
CT only)
Missed Call Summary Subscription
As-Feature-Event Subscription
Blacklist Duration
Whitelist Proxy
41-001160-03 Rev 00, Release 2.5
Configuring Advanced Operational Features
Advanced Operational Features
Description
Allows you to enable or disable the sending of the MAC
address and line number from the IP phone to the call
server, in a REGISTER message.
Allows you to enable or disable the phone to use the Blind
Transfer method available in software prior to release 1.4.
Allows you to enable or disable the updating of the Caller ID
information during a call.
Allows you to enable or disable Web recovery mode and set
the maximum boot count on the IP phone.
The IP phones automatically perform an auto-discovery of all
servers on a network using mDNS. When the IP phone
discovers a TFTP server, it is automatically configured by
that TFTP server.
Allows you to enable or disable a single call restriction
between the 6757i CT base unit and a call server.
Allows missed calls that have been redirected by the server,
to be incremented in the missed calls indicator on the phone
it was initially directed to.
Allows you to enable or disable a specific line on the phone
with the BroadSoft's server-side DND, CFWD, or ACD
features.
Allows you to specifies the length of time, in seconds, that a
failed server remains on the server blacklist. The IP phone
avoids sending a SIP message to a failed server (if another
server is available) for this amount of time.
Allows you to configure the phone to either accept or reject
call requests from a trusted proxy server.
6-3