Multiple Configuration Server Settings - Aastra 9143i Series Administrator's Manual

Multiple Configuration Server Settings

Parameter –
firmware server
Description
Format
Default Value
Range
Example
Additional Information
The directory files, language packs, TLS certificate files, 802.1x certificate files,
and HTTPS files can also be downloaded to the phone from a server other than the
configuration server. For each of these types of files, you can specify a URL
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
Configuration Files
Specifies the URL of a server (other than the original configuration
server) from which the phones in the network get their firmware.
Note: The default method for the update of firmware to the phones is
from the original configuration server. The Administrator must specify a
correct server URL for the phones to get their firmware information from
that server. If the URL is incorrect, no firmware download occurs to the
phones from the specified server.
String (up to 256 characters)
FTP
"ftp://username:password@0.0.0.0:port/path"
TFTP
"tftp://0.0.0.0:port/path"
HTTP
"http://0.0.0.0:port/path"
HTTPS
"https://0.0.0.0:port/path"
Blank
Not Applicable
firmware server:
Leaving this parameter blank downloads all configuration and firmware
files from the original configuration server.
firmware server: tftp://10.30.102.158/test1
The above example uses TFTP to download all firmware files that exist
in the "test1" directory on the specified server, to the phones.
aastra.cfg, <mac>.cfg
A-29