IP Phone Administrator Guide
Operational Features
Configuring XML for Directed Call Pickup
Use the following procedure to configure XML for Directed Call Pickup in the
configuration files.
Configuration Files
To set XML in the configuration files for Directed Call Pickup, see Appendix A, the section,
Programmable Key/Feature Key/Expansion Module Key Parameters"
5-138
Notes:
1.
Before implementing this procedure, you must create an XML
application that the phone uses when the XML softkey or programmable
key is pressed. This XML application must be entered as a URI in the
"Value" field of the XML key. For information about creating an XML
script, see
Appendix
F, the section,
on
page
F-6.
2.
You must enable Directed Call Pickup before performing these
procedures. See
"Enabling/Disabling Directed Call Pickup"
page
5-133.
"Text Menu Object (Menu Screens)"
on
page A-216.
41-001160-03 Rev 00, Release 2.5
on
"Softkey/