Aastra 9143i Series Administrator's Manual page 113

Parameter in
Aastra Web UI
Call Waiting
Note: This option can
be set by both Users
and Administrators.
Play Call Waiting Tone
Note: This option can
be set by both Users
and Administrators.
Stuttered Dial Tone
Note: This option can
be set by both Users
and Administrators.
XML Beep Support
Note: This option can
be set by both Users
and Administrators.
Status Scroll Delay
(seconds)
Note: This option can
be set by both Users
and Administrators.
Incoming Call Interrupts
Dialing
Note: This option can
be set by both Users
and Administrators.
Switch Focus to Ringing
Line
Note: This option can
be set by both Users
and Administrators.
41-001160-03 Rev 00, Release 2.5
Parameter in
Configuration Files
call waiting
call waiting tone
stutter disabled
xml beep notification
xml status scroll delay
incoming call interrupts
dialing
switch focus to ringing
line
Administrator Level Options
Description
Enable or disables Call Waiting on the IP Phone.
For more information on this feature, see.
Waiting/Call Waiting Tone"
Enable or disables the playing of a call waiting tone
when a caller is on an active call and a new call comes
into the phone.
For more information on this feature, see.
Waiting/Call Waiting Tone"
Enable or disables the playing of a stuttered dial tone
when there is a message waiting on the IP phone.
For more information on this feature, see.
Dial Tone" on page 5-70.
Enables or disables the playing of a beep to indicate a
status on the phone. When the phone receives a
status message, the BEEP notifies the user that the
message is displaying.
For more information on this feature, see
Support" on page 5-72.
Allows you to set the time delay, in seconds, between
the scrolling of each status message on the phone.
For more information on this feature, see
Scroll Delay" on page 5-74.
Enable or disables how the phone handles incoming
calls while the phone is dialing out. For more
information on this feature, see
Interrupts Dialing" on page
Enables or disables whether or not the UI focus is
switched to a ringing line while the phone is in the
connected state.
For more information on this feature, see
Focus to Ringing Line" on
Administrator Options
"Call
on page 5-67.
"Call
on page 5-67.
"Stuttered
"XML Beep
"Status
"Incoming Call
5-76.
"Switch
page 5-79.
3-21