Aastra 9143i Series Administrator's Manual page 919

Parameter –
sip autodial timeout
Autodial Timeout
(in Web UI)
Description
Format
Default Value
Range
Examples
Per-Line Settings
Parameter –
sip lineN autodial number
Autodial Number
(in Web UI)
Description
Format
Default Value
Range
Examples
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
Aastra Web UI Advanced Settings->Global SIP->
Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Globally specifies the time, in seconds, that the phone waits to dial a
preconfigured number after the handset is lifted from the IP phone
cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Integer
0
0 to 120
sip autodial timeout: 30
Aastra Web UI Advanced Settings->LineN->Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
On a per-line basis, this parameter specifies the SIP phone number that
the IP phone autodials when the handset is lifted from the phone cradle.
Valid values can be:
-1 (Default) The phone uses the global
autodial setting for this line.
Blank (Empty field) Disables autodial on this line.
Valid SIP Number Dials the SIP number specified for this line.
Integer
-1
Any valid SIP number.
sip line1 autodial number: 8500
A-139