Aastra 9143i Series Administrator's Manual page 239

The following parameters allow an administrator to configure ToS, QoS, and
DiffServ QoS for VLAN:
Parameters in Configuration Files
Global
tagging enabled
priority non-ip
LAN Port
vlan id
tos priority map
tos priority map
tos priority map
PC Port
vlan id port 1
QoS eth port 1 priority
41-001160-03 Rev 00, Release 2.5
Configuring Network and Session Initiation Protocol (SIP) Features
Notes:
1. In order for the software to successfully maintain connectivity with a
network using VLAN functionality, the IP phone reboots if you modify
the "tagging enabled" (VLAN Enable in the Web UI), "vlan id", or
"vlan id port 1" parameters.
2. When the LAN Port (vlan id) and the PC Port (vlan id port 1)
parameters have the same value, VLAN functionality is compatible with
earlier IP phone software releases.
If you set the PC Port (vlan id port 1) to 4095, all untagged packets are
sent to this port. For configuring this feature via the Phone UI and the
Aastra Web UI, see "Configuring VLAN (optional)"
configuring this feature using the configuration files, see Appendix A, the
section, "Virtual Local Area Network (VLAN) Settings"
Network Settings
Parameters in Aastra Web UI
VLAN enable
Priority, Non-IP Packet
VLAN ID
SIP Priority
RTP Priority
RTCP Priority
VLAN ID
Priority
on page 4-60. For
on page A-42.
4-55