IP Phone Administrator Guide
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
Parameter –
softkeyN value
Value
(In Web UI)
Description
A-222
Aastra Web UI
Configuration Files
This is the value you assign to the softkey.
The "softkeyN value" parameter can be set for the following softkey types
only:
•
speeddial
(you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial softkey; you then
enter the rest of the number from the keypad on the
phone.)
•
blf
•
sprecode
•
park
•
pickup
•
dcp
•
xml
•
blf/xfer
•
speeddial/xfer
•
speeddial/conf
•
paging
Notes:
1.
For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2.
For blf - Value is the extension you want to monitor.
3.
For sprecode - Value is dependent on services offered by server.
4.
For Park, Pickup - For valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
Park/Pickup examples, see Chapter 5, the section,
Models with 8 and 11-Line LCDs"
5.
For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
•
$$SIPUSERNAME$$
•
$$SIPAUTHNAME$$
•
$$PROXYURL$$
•
$$LINESTATE$$
•
$$LOCALIP$$
•
$$REMOTENUMBER$$
•
$$DISPLAYNAME$$
•
$$SIPUSERNAME$$
•
$$INCOMINGNAME$$
•
$$CALLDURATION$$
•
$$CALLDIRECTION$$
Operation->Softkeys and XML
aastra.cfg, <mac>.cfg
on
page -236.
41-001160-03 Rev 00, Release 2.5
on
page
-238. For
"Examples for