Voicemail (Not Applicable To 6751I) - Aastra 9143i Series Administrator's Manual

Voicemail (not applicable to 6751i)

The Voicemail feature on the IP phones allow you to configure lines with phone
numbers so the phone can dial out to connect to a voicemail server. You associate
the Voicemail numbers with the phone numbers configured on each line (1 - 9
lines or 1-6 lines depending on your model phone).
For each assigned Voicemail number, there can be a minimum of 0 or a maximum
of 1 Voicemail access phone number.
The Voicemail list displays a list of phone numbers assigned to the IP phone that
has registered voicemail accounts associated with them.
The phone displays up to 99 voicemails for an account even if the number of
voicemails exceeds the limit.
Registered account numbers/URIs that exceed the length of the screen, either with
or without the voicemail icon and the message count, are truncated with an ellipse
character at the end of the number/URI string.
The end of the Voicemail list displays the number of new voicemail messages (if
any exist).
Configuring Voicemail (not applicable to the 6751i)
You configure Voicemail in the configuration files to dial a specific number to
access an existing voicemail account. The user then follows the voicemail
instructions for listening to voicemails.
41-001160-03 Rev 00, Release 2.5
Note: The Voicemail list does not display the voicemail access number.
Note: The phone must have a registered voicemail account from a server
for this feature to be enabled. When no registered voicemail accounts are
registered to the phone, the display shows "List Empty".
Configuring Operational Features
Operational Features
5-313