Module/Debug Level Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Troubleshooting
In the Aastra Web UI, you use the following parameters to configure log
settings:
• Log IP - The IP address for which to save log files for troubleshooting
purposes.
• Log Port - The IP port to use to save log files for troubleshooting purposes.
Reference
For more information about the log setting configuration parameters, see
Appendix
For information about configuring the log settings using the Aastra Web UI, see
"Performing Troubleshooting Tasks"

Module/Debug Level Settings

The Aastra IP phones provide blog module support that allows enhanced severity
filtering of log calls sent as blog output.
The blog, as used on the IP phones, is a an online debugging tool that can be
frequently updated and intended for technical support analyzation. Blogs are
defined by their format: a series of entries posted to a single page in
reverse-chronological order. The IP Phone blogs are separated into modules
which allow you to log specific information for analyzing.
The following table identifies the blog modules you can set.
Aastra Web UI Parameters
LINMGR (Line Manager information)
UI (User Interface (UI) related)
MISC (Miscellaneous)
SIP (Call control SIP stack)
DIS (Display drivers)
DSTORE (Delayed storage)
EPT (Endpoint module)
IND (Indicator module)
9-4
A, the section, "Troubleshooting Parameters" on
on page 9-8.
Configuration File Parameters
log module linemgr
log module user interface
log module misc
log module sip
log module dis
log module dstore
log module ept
log module ind
41-001160-03 Rev 00, Release 2.5
page A-271.