IP Phone Administrator Guide
Firmware and Configuration Files
The above example uses TFTP to download all firmware files that exist in the
"test1" directory on the specified server, to the phones.
Specifying a Server to Download Firmware Files
You can use the following parameter to specify a server other than the original
configuration server from which the phones get their firmware:
•
firmware server.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
Configuration Server Settings"
1-46
Note: Specifying the download of a ".st" file is not supported. For
example, the following filename should NEVER be entered as a value
string for the "firmware server" parameter:
firmware server: tftp://10.30.102.158/test1/57i.st
on
page A-29.
"Multiple
41-001160-03 Rev 00, Release 2.5