Aastra 9143i Series Administrator's Manual page 246

IP Phone Administrator Guide
Network Settings
IP Phone UI
Step Action
22 Enter a value from 1 to 4095 to specify the VLAN ID for the PC Port.
Default is 1.
Note: If you set the PC Port VLAN ID (Port 1) to 4095, all untagged packets are sent to this port. The
following is an example of configuring the phone on a VLAN where all untagged packets are sent to
the PC Port (passthrough port).
Example
You enable tagging on the phone port as normal but set the passthrough port (PC Port) to
4095. The following example sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
VLAN Settings->VLAN Enable: Yes
VLAN Settings->Phone VLAN->Phone VLAN ID: 3
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
23 Press Done to save the change.
24 Select PC Port Priority.
25 Select a PC Port VLAN priority value from 0 to 7 for the PC Port.
Default is 0.
26 Press Done (4 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
27 Select Restart.
4-62 41-001160-03 Rev 00, Release 2.5