Message Waiting Indicator Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters
Parameter –
call waiting tone
Play Call Waiting Tone
(in Web UI)
Description
Format
Default Value
Range
Example

Message Waiting Indicator Settings

Parameter –
mwi led line
Message Waiting Indicator
Line
(in Web UI)
Description
Format
Default Value
Range
Example
A-174
Aastra Web UI:
Configuration Files
Enable or disables the playing of a call waiting tone when a caller is on an
active call and a new call comes into the phone.
Note: The Call Waiting Tone feature works only if the Call Waiting
parameter is enabled.
Boolean
1 (enabled)
0 (disable)
1 (enabled)
call waiting tone: 0
Aastra Web UI
Configuration Files
Allows you to enable the Message Waiting Indicator (MWI) on a single
line or on all lines on the phone. For example, if you set this parameter to
3, the LED illuminates if a voice mail is pending on line 3. If you set this
parameter to 0, the LED illuminates if a voice mail is pending on any line
on the phone (lines 1 through 9).
Note: To enable MWI for all lines in the configuration files, set this
parameter to zero (0). The enable MWI for all lines in the Aastra Web UI,
select "All" in the "Message Waiting Indicator Line" field.
Integer
0 (all lines)
0 to 9
mwi led line: 3
Basic Settings->Preferences->General
aastra.cfg, <mac>.cfg
Basic Settings->Preferences->General
aastra.cfg, <mac>.cfg
41-001160-03 Rev 00, Release 2.5